- Restoration Packages
You Can Also Use these Options to Purchase Restoration Package DHR301 Please Email Us Your Shipping, Billing Address(s) and All Your Contact Information
to firstname.lastname@example.org So We Can Prepare You A Invoice
Complete Our Information Form So We Can Send You A Invoice
Please Call Eric Direct
To Make Sure This Package Will Work for Your Specific Needs
Before You Purchase at
Our Online Store
One Eliminator Restoration
Two DH Elite HT/LA Air Movers
Two 25' 12 Gauge Lighted Power Cords 120VAC
Two 50' 12 Gauge Lighted Power Cords 120VAC
One Digital IR Thermometer Meter
One Eliminator Manual
20,473 Btu’s of Heat
6,000 Watts of Heat
This is our lowest priced restoration package. Perfect for most restoration companies just getting into heat drying.
Restoration Package DHR301 comes with, One Eliminator Restoration which is our most popular restoration 120VAC heater.
You can heat a room, duct it into cabinets, dry hardwood floors and much more.
I personally have used these for years and prefer the Eliminator Restoration.
You get about 22° per circuit temperature rise and you have four circuits.
You can use only one circuit or use all the way up to four circuits depending on your particular application.
You also get two DH Elite HT/LA Air Movers.
The DH Elite HT/LA Air Mover was designed from the ground up to work in heat.
The body, fan blade and motor all were designed for heat.
The DH Elite HT/LA Air Mover has a variable speed controller so you can turn
the air flow higher or lower with a simple twist of the knob.
The Forward Air Directional Technology gives you a more concentrated air flow
which gives you much better drying because where you aim the DH Elite HT/LA at is where the air will go.
The power draw from this air mover is 1.8Amps at startup and 1.6Amps running.
It also has daisy chain, ball bearing motor, high temperature rating and only weights 26.6 lbs.
I have been working in the restoration business for over 30 years and I think this is the best axial air mover I have ever used.
Restoration Package DHR301 also comes with two 25’ power cords and two 50’ power cords.
This allows you to reach almost any circuit in a average home.
Last but not least you get one Digital IR Thermometer Meter for checking material temperatures.
Variable Speed Controller
Designed to Work High Temperatures Associated for Restoration and Heat Drying
1.8 Amps. 1.6 Amps Running Amps
Ball Bearing Motor
11" x 20" x 22.5"
12 Gauge Lighted Power Cords
Eliminator Restoration Manual
FREE Tech Support for All Restoration Equipment We Sell. Please Call 303-257-8056
Part Number DH-R301
Copyright 2008-2016.DRI Heat Inc. All Rights Reserved.